We produce a wide range of products, including aluminum coil, aluminum sheet, coated coil, aluminum foil, aluminum jacketing, aluminum sublimation sheet, aluminum honeycomb panel, and perforated aluminum.
Each case below shows one product exported to one country. Our clients are satisfied with product quality, delivery time, and service.
Export Cases Overview
| Product | Country | Application | Client Feedback |
|---|---|---|---|
| Aluminum Coil | Vietnam | Roofing | Stable quality, fast delivery |
| Aluminum Sheet | Mexico | Construction | Good surface, easy processing |
| Coated Aluminum Coil | UAE | Decoration | Bright color, strong coating |
| Aluminum Foil | Saudi Arabia | Packaging | Clean surface, food grade |
| Aluminum Jacketing | USA | Pipe insulation | Strong and durable |
| Aluminum Sublimation Sheet | Spain | Printing | Good coating, clear image |
| Aluminum Honeycomb Panel | Australia | Facade | Lightweight, high strength |
| Perforated Aluminum | Canada | Ceiling | Accurate holes, good finish |
EXHIBITION
Detailed Project Cases
Aluminum Coil – Export to Vietnam
Our aluminum coil was exported to Vietnam for roofing use. The customer required stable thickness and smooth surface.
We ensured strict quality control during production. The coils were packed with waterproof film and wooden pallets.
Client feedback:
- Product quality is consistent
- Delivery was on time
- Packaging was safe
The client plans to place repeat orders.
Aluminum Sheet – Export to Mexico
We supplied aluminum sheets to a construction company in Mexico. The sheets were used for wall panels.
The customer required flatness and easy cutting.
Client feedback:
Good price for bulk order
Surface is clean and smooth
Easy to process
Coated Aluminum Coil – Export to UAE
Our coated aluminum coil was exported to the UAE for building decoration.
The client selected custom colors and required strong coating performance under high temperature.
Client feedback:
Good weather resistance
Color is uniform
Coating is durable
Aluminum Foil – Export to Saudi Arabia
We delivered aluminum foil to Saudi Arabia for food packaging.
The product met international standards and hygiene requirements.
Client feedback:
Stable supply
Clean and safe material
Good flexibility
Aluminum Jacketing – Export to USA
Our aluminum jacketing was exported to the USA for pipe insulation.
The customer required corrosion resistance and good mechanical strength.
Client feedback:
Meets project standards
Strong and durable
Easy installation
Aluminum Sublimation Sheet – Export to Spain
We exported aluminum sublimation sheets to Spain for printing applications.
The sheets were used for photo panels and signage.
Client feedback:
No color fading
Coating quality is excellent
Printing effect is clear
Aluminum Honeycomb Panel – Export to Australia
Our aluminum honeycomb panels were used in building facade projects in Australia.
The client needed lightweight panels with high strength.
Client feedback:
Good strength-to-weight ratio
Flat and stable panels
Easy installation
Perforated Aluminum – Export to Canada
We supplied perforated aluminum sheets to Canada for ceiling systems.
The client required precise hole size and clean edges.
Client feedback:
Good appearance
Accurate perforation
Smooth surface
Why Clients Choose Our Factory
- Direct factory supply
- Stable product quality
- Competitive price
- Fast delivery time
- Professional export service
Packaging and Delivery
We use safe export packaging:
- Wooden pallets
- Waterproof plastic film
- Corner protection
Delivery methods:
- Sea freight (FCL / LCL)
- Air freight for urgent orders
Our aluminum products For sale
Our aluminum products are exported to many countries worldwide. Each project shows our strong production ability and reliable service.
Clients are satisfied with our quality, delivery, and communication. We continue to support global customers with stable supply and professional solutions.
If you are looking for a reliable aluminum supplier, we are ready to work with you.
Case 1 → Food Packaging Manufacturer, Mexico
Product: 8011-O Aluminum Foil for Lidding Thickness: 0.04mm Width: 600mm Annual volume: 80 tons
A food packaging company in Mexico was having problems with their previous supplier. The foil kept showing small pinholes after slitting, which caused leakage in their lidding application. They sent us a sample of the rejected roll and asked if we could match or improve it.
We ran their spec through our 8011 alloy line in O temper. The key for lidding foil is low pinhole count and clean edges after slitting. We sent a 1-ton trial roll before the full order.
What they said after the trial:
“The slitting quality is much cleaner. We ran 3 shifts with zero rejections. We’re moving the rest of our volume to you.”
Spec Snapshot
| Item | Detail |
|---|---|
| Alloy | 8011 |
| Temper | O |
| Thickness | 0.04mm ± 0.003mm |
| Width | 600mm |
| Surface | Bright one side / matte one side |
| Pinhole count | ≤ 1 per m² |
Case 2 → Construction Cladding Project, Saudi Arabia
Product: 3003-H24 Aluminum Sheet for Curtain Wall Panels Thickness: 2.0mm Width: 1250mm Order size: 25 tons
A facade contractor in Riyadh needed aluminum sheet for a commercial building curtain wall. The panels required PVDF coating in RAL color and had to meet local wind-load specs. The client wanted consistent flatness because the panels were large format — up to 3000mm long.
We supplied 3003-H24 sheet with a standard PVDF coating line. Flatness tolerance was kept within ±1mm over 2000mm, checked by roller leveling before shipping.
Why 3003 for Curtain Wall
3003 adds manganese to pure aluminum. It gives better strength than 1100 series while keeping good formability. In hot climates like Saudi Arabia, it also resists corrosion better than mild steel, with no rust over time.
| Alloy | Tensile Strength | Corrosion Resistance | Formability |
|---|---|---|---|
| 1100 | Low | Good | Excellent |
| 3003 | Medium | Very Good | Good |
| 5052 | High | Excellent | Moderate |
For curtain wall panels that don’t need deep bending, 3003-H24 hits the right balance of strength and cost.
Case 3 → Industrial Kitchen Equipment, Germany
Product: 5052-H32 Aluminum Sheet Thickness: 1.5mm and 2.0mm Width: 1000mm and 1250mm Total order: 40 tons over 12 months
A German kitchen equipment maker needed marine-grade aluminum for their professional cooking line — mainly storage cabinets, work surfaces, and hood structures. They required EN standard certification and full traceability.
We supplied 5052-H32 with full mill test reports (MTR), EU food-safe declaration, and batch traceability. The order runs on a monthly call-off schedule.
Why They Chose 5052
5052 has higher magnesium content than 3003. It handles acidic cleaning agents well, which is important in commercial kitchen environments where surfaces get cleaned multiple times a day with strong chemicals.
- Resistant to food acids and cleaning chemicals
- Good weldability for frame assembly
- No surface coating needed for indoor use
- Easy to cut and bend with standard tools
Case 4 → Lithium Battery Foil, South Korea
Product: 1235-O Aluminum Foil for Battery Current Collector Thickness: 0.012mm – 0.016mm Width: 400mm – 600mm Order: Trial 2 tons, expanded to 50 tons
A South Korean battery component supplier was qualifying new foil vendors. Their spec was strict: ultra-thin foil with no rolling defects, consistent thickness across the full width, and a clean surface free of oil residue.
This type of foil is one of the harder items we produce. At 0.012mm, the foil is thinner than a human hair. The rolling mill must maintain precise tension and temperature. Surface oil must be cleaned to below 5mg/m².
Result: Passed their incoming QC test with 0 defects on the trial roll. Ongoing supply agreement signed.
Lithium Battery Foil Spec Comparison
| Parameter | Standard Foil | Battery Grade Foil |
|---|---|---|
| Alloy | 8011 | 1235 |
| Thickness | 0.04mm–0.20mm | 0.010mm–0.020mm |
| Surface cleanliness | Standard | < 5mg/m² residual oil |
| Tensile strength | General range | ± 5MPa controlled |
| Width tolerance | ± 1mm | ± 0.3mm |
Case 5 → Mirror Finish Sheet for Signage, UAE
Product: 1060 Mirror Aluminum Sheet Thickness: 0.8mm and 1.0mm Width: 1000mm and 1220mm Surface: 8K mirror finish
A signage company in Dubai needed mirror aluminum sheet for interior decorative panels and retail display backdrops. The surface had to be consistent across the full sheet — no streaks, no swirl marks, and no oxidation spots.
We supplied 1060 alloy in 8K mirror finish. This grade uses high-purity aluminum (99.6%) so the surface polishes to a near-optical reflection. A protective PE film was applied before packaging to prevent scratches in transit.
Mirror Grade Comparison
| Finish Grade | Reflectivity | Typical Use |
|---|---|---|
| 6K | ~80% | General decoration |
| 8K | ~90% | High-end signage, display |
| 10K | ~95% | Optical and precision use |
The client re-ordered three times in the first year. They told us the consistent surface quality saved them labor on installation because no panel needed to be rotated or re-cut due to finish variation.
Case 6 → Roofing and Gutter Coil, Australia
Product: 3105-H24 Aluminum Coil for Gutter Roll Forming Thickness: 0.6mm and 0.9mm Width: 175mm (gutter profile) and 300mm (downpipe) Coating: PE pre-painted, 10 standard colors
A roofing materials distributor in Australia placed their first order for pre-painted gutter coil. They supply regional builders and needed consistent paint adhesion, correct forming temper, and fast delivery.
We ran their profiles on our PE coating line. The coil goes through a cleaning stage, a chemical conversion coat, a primer layer, then the topcoat. Final dry film thickness is 18–22 microns.
Color Options and Lead Time
| Color | RAL Code | Stock | Lead Time |
|---|---|---|---|
| White | RAL 9003 | Yes | 7–10 days |
| Cream | RAL 9001 | Yes | 7–10 days |
| Dark Grey | RAL 7016 | Limited | 15–20 days |
| Terracotta | RAL 8004 | No | 20–25 days |
| Custom | — | No | 25–30 days |
Case 7 → Anodized Sheet for Electronics Housing, Japan
Product: 6061-T6 Anodized Aluminum Sheet Thickness: 1.5mm and 2.0mm Anodize: Natural clear, 15 microns Size: 1000mm × 2000mm sheets
A Japanese electronics company needed precision flat sheet for CNC machining into device enclosures. The material had to hold tight dimensional tolerances and machine cleanly without burr or tear.
6061-T6 is a go-to alloy for this type of work. It has good machinability, holds close tolerances, and takes anodize evenly. We supplied flat-packed sheets with interleaved paper to prevent surface contact damage.
6061 vs Other Machining Alloys
| Alloy | Machinability | Anodize Quality | Strength | Cost |
|---|---|---|---|---|
| 6061-T6 | Good | Excellent | Medium-High | Moderate |
| 7075-T6 | Moderate | Fair | High | Higher |
| 2024-T3 | Good | Poor | High | Higher |
| 5052-H32 | Moderate | Good | Medium | Moderate |
For electronics housing where appearance after anodize matters, 6061 is usually the first choice.
Case 8 → Aluminum Strips for Cable Winding, India
Product: 1060-O and 1070-O Aluminum Strip Thickness: 0.15mm – 0.5mm Width: 10mm – 80mm Use: Transformer winding and cable shielding
An Indian electrical equipment manufacturer needed narrow aluminum strips with very smooth edges. In cable winding, rough edges cause insulation damage over time, which leads to short circuits.
We ran the strip through a precision slitting line and deburred the edges before spooling. Spool weight was set to their winding machine spec — 5kg and 10kg spools.
- Width tolerance: ± 0.1mm
- Edge condition: burr-free, rolled edge
- Surface: clean, no oil stain on inner layer
- Alloy: 1060 or 1070 depending on conductivity requirement
1070 has slightly higher conductivity (61% IACS) than 1060 (59% IACS), which the client needed for their high-efficiency transformer line.
Case 9 → Embossed Aluminum Sheet for Refrigerator Liner, Turkey
Product: 1100-H14 Embossed Aluminum Sheet (Stucco Pattern) Thickness: 0.4mm Width: 1000mm Pattern: 5-bar tread plate, stucco
A Turkish appliance manufacturer uses embossed sheet for refrigerator interior liners and some external decorative panels. They needed a consistent pattern depth and high surface brightness.
Stucco pattern gives a non-slip surface and hides minor scratches in use. The 1100 alloy gives a bright finish after the embossing roll. We matched their existing pattern depth — 0.08mm to 0.12mm — so the parts fit their existing fixtures without adjustment.
Embossed Pattern Types Available
| Pattern | Common Use | Depth Range |
|---|---|---|
| Stucco | Appliances, decoration | 0.08–0.12mm |
| 5-Bar Tread | Flooring, steps | 0.8–1.2mm |
| Diamond | Industrial flooring | 1.0–1.5mm |
| Pebble | Decorative panels | 0.05–0.08mm |
What Buyers Ask Us Most
Do you supply mill test reports with every order
Yes. Every shipment includes a full mill test report (MTR) with chemical composition and mechanical properties. We can also provide third-party inspection reports from SGS, BV, or TÜV if required.
Can you match a competitor’s spec sheet
In most cases, yes. Send us the spec and a sample if you have one. We will confirm which alloy and temper matches, then send a trial quantity before a full order.
What is your minimum order quantity
MOQ depends on the product. For standard coil and sheet, MOQ is usually 2 tons per spec. For specialty items like battery foil or ultra-thin strip, MOQ can be 1 ton. We accept smaller trial orders for new customers.
How long does a trial order take
Standard products ship in 7–15 days from order confirmation. Specialty items like PVDF-coated sheet or anodized material take 20–30 days depending on the coating line schedule.
Can you produce custom widths and slit coils
Yes. Our slitting line handles widths from 10mm to 2650mm. Custom slit coils are a standard service. We slit to ± 0.1mm width tolerance for precision strip applications.
What certifications do you hold
We hold ISO 9001 quality management certification. Our food-contact foil products carry food-grade compliance declarations for EU, US (FDA), and Chinese standards. SGS, BV, and intertek inspection is available on request.
How do you handle complaints or quality issues
If a product fails incoming inspection at your facility, contact us with photos, the MTR, and the rejection reason. We review each case within 48 hours. For confirmed quality issues, we offer replacement or credit on the next order.